第1章  PowerBuilder編程規范                  
                   
 1.1 事件命名標準                  
 1.1.1 標準事件                  
 1.1.2 類庫事件                  
 1.1.3 絕緣層事件                  
 1.1.4 菜單事件                  
 1.1.5 其他事件                  
 1.1.6 事件命名小結                  
 1.2 變量命名標準                  
 1.2.1 語法約定                  
 1.2.2 標準數據類型前綴                  
 1.2.3 標準對象數據類型前綴                  
 1.3 對象命名標準                  
                   
 第2章  窗口和控制的使用技巧                  
                   
 2.1 如何使窗口自動居中                  
 2.2 如何在MDI窗口中顯示背景圖片                  
 2.3 如何使窗口內控件的大小與窗口尺寸同步                  
 2.4 如何實現WIN 95風格的上下文幫助                  
 2.5 PowerBuilder 7新增控制的使用                  
 2.6 如何阻止用戶在窗口內移動數據窗口控制                  
 2.7 如何為應用添加啟動畫面                  
 2.8 如何為窗口控制增加ToolTips                  
 2.9 如何制作帶圖片的菜單                  
                   
 第3章  數據窗口的使用技巧                  
                   
 3.1 如何實現數據窗口的多行選擇                  
 3.2 如何實現數據窗口的模糊查詢                  
 3.3 如何用單數據窗口實現多表更新                  
 3.4 如何在數據窗口中實現金額的大小寫轉換                  
 3.5 如何根據條件改變記錄顏色                  
 3.6 如何調用數據窗口內嵌函數                  
 3.7 如何在DataWindow中實現列的自動折行                  
 3.8 如何實現下拉數據窗口中的關鍵字搜索                  
 3.9 如何在數據窗口中用回車鍵代替Tab鍵在字段間移動                  
 3.10 在數據窗口中實現上下文相關微幫助技術                  
 3.11 數據窗口自動刷新技術的使用                  
 3.12 在應用程序開發中使用數據存儲“Datastore”技術替代游標                  
 3.13 如何實現數據窗口的異步檢索                  
 3.14 如何在數據窗口中實現文本閃爍                  
                   
                   
 第4章  報表的處理與打印技術                  
                   
 4.1 用DataWindow對象解決報表問題                  
 4.1.1 嵌套報表                  
 4.1.2 自由格式的數據窗口報表                  
 4.1.3 PSR文件報表                  
 4.2 多數據窗口打印技術                  
 4.2.1 如何在一個打印作業中一次打印多個數據窗口                  
 4.2.2 連續頁號打印多個數據窗口                  
 4.3 局部數據窗口數據打印技術                  
 4.4 如何制作中國式報表                  
 4.5 如何動態設置打印機                  
 4.6 如何進行大文本打印                  
 4.7 如何在數據窗口中打印條形碼                  
 4.8 打印前的模擬顯示技巧                  
                   
                   
 第5章  用戶對象的使用技術                  
                   
 5.1 如何在Power++中開發NVO對象                  
 5.2 如何實現文件夾的瀏覽                  
 5.3 如何實現數據窗口動態列排序                  
 5.4 如何實現操作系統與PowerBuilder應用間的數據拖放                  
 5.5 如何在程序中使用有聲按鈕                  
 5.6 如何利用Word功能實現文字檢查                  
 5.7 如何將程序圖標添加到系統欄                  
 5.8 如何在程序中動態的設置系統時間                  
                   
 第6章  數據管道的使用技術                  
                   
 6.1 什么是數據管道                  
 6.2 如何創建數據管道                  
 6.2.1 啟動數據管道畫筆                  
 6.2.2 設置數據管道選項                  
 6.2.2.1 與源表相關的和選項設置                  
 6.2.2.2 與目的表相關的選項設置                  
 6.2.2.3 BLOB類型數據的處理                  
 6.2.2.4 設置數據管道操作                  
 6.2.2.5 改變源數據庫和目的數據庫                  
 6.2.3 測試數據管道                  
 6.2.3.1 運行數據管道                  
 6.2.3.2 修復數據管道錯誤                  
 6.2.4 保存數據管道                  
 6.2.5 退出數據管道畫筆                  
 6.3 如何在程序中實現不同數據庫之間的數據傳遞                  
                   
 第7章  組件（DDE. OCX. OLE和ACTIVEX）使用技術                  
                   
 7.1 組件的發展和術語                  
 7.2 DDE技術                  
 7.2.1 DDE的原理和術語                  
 7.2.2 服務器標識信息的獲得                  
 7.2.3 PowerBuilder作為客戶端的完整過程                  
 7.2.4 PowerBuilder作為服務器                  
 7.2.5 有關DDE的函數和事件                  
 7.2.6 如何通過DDE技術實現程序間的數據共享                  
 7.3 OLE技術                  
 7.3.1 OLE2.0術語                  
 7.3.2 OLE技術在數據窗口中的使用                  
 7.3.2.1 OLE對象                  
 7.3.2.2 OLE風格的數據窗口                  
 7.3.3 OLE技術在窗口中的使用                  
 7.3.3.1 OLE 2.0容器                  
 7.3.3.2 OLE 2.0控制的激活方式                  
 7.3.3.3  OLE 2.0控制事件                  
 7.3.4 OLE自動服務器                  
 7.3.4.1 操縱OLE控制                  
 7.3.4.2 操縱OLE對象                  
 7.3.4.3 OLEObject變量                  
 7.3.4.4 Any型數據                  
 7.3.4.5 OLEStorage和OLEStream                  
 7.3.4.6 DCOM                  
 7.3.5 OCX技術                  
 7.3.6 OLE 2.0作為一個OLE服務器                  
 7.3.7 如何利用組件實現多媒體的播放                  
 7.4 ActiveX技術                  
 7.4.1 ActiveX概念                  
 7.4.2 計算模型                  
 7.4.3 ActiveX模型                  
 7.4.4 ActiveX在PowerBuilder中的使用                  
                   
 第8章  Windows API/DLL調用技術                  
                   
 8.1 外部函數概述                  
 8.2 外部函數的定義                  
 8.3 C/C++語言與powerBuilder之間數據類型的轉換                  
 8.4 參數的傳遞                  
 8.4.1 通過引用或值傳遞參數                  
 8.4.2 通過結構傳遞參數                  
 8.5 調用原則                  
 8.6 定義使用外部函數的一般步驟                  
 8.7 如何調用Windows API實現對ZIP文件的解壓                  
 8.8 常用函數列表及應用                  
 Arc( )                  
 Beep( )                  
 BringWindowToTop( )                  
 Chordv                  
 CloseHandle( )                  
 CloseWindow( )                  
 CreateDirectoryA( )                  
 DeleteFileA( )                  
 DeleteMenu( )                  
 DestroyWindow( )                  
 DllRegisterServer( )                  
 DllRegisterServer( )                  
 Ellipse( )                  
 ExitWindowsEx( )                  
 FataExit( )                  
 FindWindowA( )                  
 FreeLibrary( )                  
 GetBKColor( )                  
 GetComputerNameA( )                  
 GetClassNameA( )                  
 GetCurrentDirectoryA( )                  
 GetCurrentThread( )                  
 GetCursor( )                  
 GetCursorPos( )和CursorPos( )                  
 GetDC( )                  
 GetKeyboardState( )及SetKeyboardState( )                  
 GetKeyState( )                  
 GetModuleHandleA( )                  
 GetParent( )                  
 GetPixel( )&SetPixel( )                  
 GetSystemMenu( )                  
 GetSystemTime( )                  
 GetThreadPriority( )                  
 GetSystemMetrics( )                  
 GetUserNameA( )                  
 GetVolumnInformationA( )                  
 GetWindowsDirectoryA( )                  
 GlobalMemoryStatus( )                  
 LoadLibraryA( )                  
 mciSendStringA( )                  
 MessageBoxA( )                  
 Mouse_Evernt( )                  
 MoveToEx( )和LineTo( )                  
 MoveWindow( )                  
 Pie( )                  
 Polygon( )                  
 PostMessageA( )                  
 Rectangle( )                  
 SendMessageA( )                  
 Rectangle( )                  
 SendMessageA( )                  
 SetCapture( )及ReleaseCapture( )                  
 SetComputerNameA( )                  
 SetCurrentDirectoryA( )                  
 SetFocus( )                  
 SetThreadPriority( )                  
 Sleep( )                  
 SndPlaySoundA( )和WaveOutGetNumDevs( )                  
 SwapMouseButton( )                  
 WinExec( )                  
                   
 第9章  分布式應用的使用技術                  
                   
 9.1 什么是分布式應用                  
 9.2 PowerBuilder分布式應用的基本概念與運行原理                  
 9.3 如何實現PowerBuilder應用的分布化                  
 9.4 如何在分布應用中進行數據的傳遞                  
 9.5 如何在PowerBuilder 7.0分布應用中使用Push（推送）技術                  
                   
 第10章  郵件系統的開發                  
                   
 10.1 MAPI/TAPI簡介                  
 10.2 如何實現自動撥號功能                  
 10.3 如何實現郵件的收發                  
 10.4 如何在傳呼臺使用電子郵件實現自動尋呼                  
                   
 第11章  組件事件服務器——Jaguasr CTS                  
                   
 11.1 概述                  
 11.1.1 電子商務與多層體系結構                  
 11.1.1.1 什么是電子商務                  
 11.1.1.2 多層體系結構                  
 11.1.2 Jaguar CTS在電子商務中的作用                  
 11.1.3 Jaguar CTS的結構                  
 11.2 Jaguar CTS的組件事務管理簡介                  
 11.2.1 服務器的配置與管理                  
 11.2.1.1 Jaguar CTS的啟動                  
 11.2.1.2 創建與刪除CTS服務器                  
 11.2.1.3 服務器的屬性配置                  
 11.2.1.4 文件觀察器與實時監視器的使用                  
 11.2.2 連接高速緩存管理                  
 11.2.2.1 連接高速緩存的作用                  
 11.2.2.2 創建新的連接高速緩存                  
 11.2.2.3 將高速緩存連接到服務器                  
 11.2.2.4 修改與刪除高速緩存                  
 11.2.3 CTS組件的管理                  
 11.2.4 CTS包的管理                  
 11.2.5 CTS事務管理簡介                  
 11.2.6 角色管理                  
 11.2.6.1 創建角色                  
 11.2.6.2 添加角色到指定的包或組件                  
 11.3 Jaguar CTS組件開發簡介                  
 11.3.1 Jaguar應用程序的功能與結構                  
 11.3.2 CTS應用程序的運行模式                  
 11.3.3 CTS應用程序的構成                  
 11.3.4 CTS應用開發的方式                  
 11.4 PowerBuiler組件設計                  
 11.4.1 Jaguar CTS服務器中PowerBuiler組件與功能的實現                  
 11.4.1.1 創建組件存放包                  
 11.4.1.2 建立CTS服務器端的組件框架結構                  
 11.4.1.3 為組件定義方法                  
 11.4.1.4 為CTS裝配組件                  
 11.4.2 建立客戶端的應用                  
 11.4.2.1 連接PowerBuiler客戶到CTS服務器                  
 11.4.2.2 創建組件代理                  
 11.4.2.3 調用組件功能實現客戶應用                  
 11.5 JAVA組件設計                  
 11.5.1 JAVA包. 組件以及組件方法的定義                  
 11.5.2 創建客戶代理STUB                  
 11.5.3 編寫服務器端的JAVA代碼                  
 11.5.4 編寫客戶端的JAVA代碼                  
 11.5.5 建立HTML文檔, 運行應用程序                  
                   
 第12章  動態站點管理工具——PowerDynamo                  
                   
 12.1 PowerDynamo簡介                  
 12.1.1 什么是PowerDynamo                  
 12.1.2 安裝PowerDynamo軟件                  
 12.1.3 PowerDynamo工作原理                  
 12.1.3.1 PowerDynamo的內部組成                  
 12.1.3.2 PowerDynamo的工作原理                  
 12.1.3.3 如何瀏覽PowerDynamo站點                  
 12.2 PowerDynamo Web站點管理                  
 12.2.1 構建PowerDynamo Web站點                  
 12.2.1.1 什么是PowerDynamo Web站點                  
 12.2.1.2 如何構建PowerDynamo Web站點                  
 12.2.1.3 運行樣本應用                  
 12.2.2 PowerDynamo Web站點維護                  
 12.2.1.1 系統參數設置                  
 12.2.1.2 站點參數設置                  
 12.3 PowerDynamo Web應用開發                  
 12.3.1 Dynamo標記簡介                  
 12.3.2 DynaScript語言簡介                  
 12.3.3 練習                  
 12.4 PowerDynamo與Jaguar CTS                  
 12.4.1 PowerDynamo和Jaguar CTS的關系                  
 12.4.2 連接Jaguar CTS服務器                  
 12.4.2.1 標識Jaguar服務器                  
 12.4.2.2 創建連接Jaguar服務器的ODBC數據源                  
 12.4.2.3 創建與Jaguar服務器的永久用戶連接                  
 12.4.3 調用Jaguar CTS中的組件方法                  
                   
 附錄 生成數據庫的SQL文件